Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Member's Projects and Photos / Newbie/Northern Wisconsin 12'x24'
<< . 1 . 2 . 3 . >>
Author Message
kruz
Member
# Posted: 15 May 2018 01:45
Reply 


Hey Keith not sure you are still watching this, but I can hope! Sounds like you went through permitting. Did the cabin meet the Wisconsin UDC and make for easy enough permitting (or did you go under the radar)?

I am going to be in Ivan's area in a few weeks and was thinking of stopping in based on this post (that cabin looks just like what im looking for). I want to drop one of these on some property but was hoping to use your experience and see if im in for a fight or if it went smoothly.

Hopefully you still watch this, Thanks!

KeithC
Member
# Posted: 15 May 2018 07:35
Reply 


It did require a permit and it all went pretty smooth in Chippewa County. The requirements were that the cabin be strapped down or anchored to the Sonotubes, including the front porch. Just a good idea in the event of strong winds.

Also the porch steps had to meet certain requirements and of course the wood stove had to meet manufacturers recommendations for placement from combustible surfaces.

You should not have a problem, Ivan has them all over and I'm not aware of any serious issues that have been encountered.

smallcabin
Member
# Posted: 21 Jun 2018 15:06
Reply 


Hi Keith,

What's the total cost? How much did they charge you for transporting from the builder's place to yours?

thanks!

KeithC
Member
# Posted: 22 Jun 2018 07:30
Reply 


Site prep and delivery was about $3K. That included pouring
the sonotubes the cabin sits on and some skid steer work.

Total cost was around $20K including the cost of the cabin.

Sure beats the old camper!

KeithC
Member
# Posted: 26 Jun 2018 18:44
Reply 


Finally finished, insulated the underside of the cabin with foil faced sheet styrofoam and skirted it with treated plywood and then stained to match the cabin. Got a new Lopi woodstove to replace the simple cast iron stove, and will get it installed by this fall and the start of deer hunting season.
IMG_20170820_162137..jpg
IMG_20170820_162137..jpg


Rickety_Jim
Member
# Posted: 29 Jun 2018 03:57
Reply 


Your place looks really nice. Currently in the market for some land in the Northwoods of WI as well. Trying to stay within my means. Do you feel a similar sized cabin could have been stick framed for cheaper?

KeithC
Member
# Posted: 29 Jun 2018 21:05 - Edited by: KeithC
Reply 


I'm sure it could have. Up here and to be above board code wise it would have to be 2x6 construction to get the added r-value the thicker walls provide with the correct insulation. At least that is the way it is for new homes, I assume a building permit for a cabin if used year round would be the same. I like the idea of a metal roof, over shingles for ice, snow and in the summer shingles start to get moss covered on cabins in the woods. My cabin is really solid, but it takes awhile to get all that wood mass warmed up in the winter. But once warmed up, it really retains the heat. For me, it is more of a 3 season cabin. After New Years and hunting season is over, I might not get out there until early spring again. A stick built may have been more around $10K? I recently installed a table in my cabin which I mounted to the wall......Amish built with the tree bark live edges, and 3 stools.
IMG_20161022_142735_.jpg
IMG_20161022_142735_.jpg


mtholton
Member
# Posted: 26 Nov 2018 16:58
Reply 


Hi Keith,

Just found this post and was going to drive out to Ivan's place one of these days. Did you work directly with him or through someone else? Do you feel like the quality has held up? Looks great!

KeithC
Member
# Posted: 27 Nov 2018 19:32
Reply 


You work directly with Ivan. The quality is very good and he will likely have cabins in various stages of construction when you go there that you can look at.

Spring may be the best time.....as he will probably be building more at that time of different sizes and configurations. You wont be disappointed.

mtholton
Member
# Posted: 28 Nov 2018 12:56
Reply 


Great thank you Keith!

Terry Beauchamp
Member
# Posted: 1 Mar 2019 18:06
Reply 


Keith

You did a great job with your cabin. I was thinking of doing exactly what you did. I will have to check the cabin builder out. Thanks for the pictures and updates.

KeithC
Member
# Posted: 1 Mar 2019 18:25
Reply 


Thanks Terry! Good Luck with your project!

Keith

Terry Beauchamp
Member
# Posted: 1 Mar 2019 19:37
Reply 


Keith,

Did you have to do the clear coat on the inside or did it come already done? Also, did you have to contract the moving of the cabin or did you go through Ivan for the sonic cement piers, site prep, and moving? I would need it delivered to Land O Lakes Wi.

Thanks,

Terry

KeithC
Member
# Posted: 1 Mar 2019 20:07
Reply 


The floors came varnished. My interior walls are natural with no finish.

Ivan works with a contractor that can do the sight prep and the moving. He has moved them into Minnesota from Chetek / Sioux Creek Township, so probably not a problem to do your move and prep.

Terry Beauchamp
Member
# Posted: 1 Mar 2019 20:16
Reply 


Thanks Keith! My wife and I are very impressed with the cabins. The prices sound very reasonable also.

Thanks again for posting. We were looking at Amish cabins built in Ohio, but Prefer to buy in Wisconsin.

Thanks,

Terry

KeithC
Member
# Posted: 1 Mar 2019 20:29
Reply 


Some of his larger cabins with finished kitchen cabinetry and counter tops are absolutely breathtaking.

Incredible value! Good luck....let me know if I can help.
I live about 30 miles from Hilly Acres Cabins.

The Amish community has no phones or computers, so you may need to make a visit and cover a lot of business territory in one trip.

Terry Beauchamp
Member
# Posted: 3 Mar 2019 06:58
Reply 


Thanks Keith! I might have a question here and there for you during our process. Have you been up to check on the roof with all the snow this year? I am sure you probably have as much as we do in Land O Lakes. I would think with the metal roof most of it would come off.

Thanks,

Terry

KeithC
Member
# Posted: 3 Mar 2019 07:52
Reply 


I'm almost afraid to go look! My cabin is back in the woods a 100 yards or so from the road, so would have to trek back in snow 3-4 ft deep. With the metal roof it slides off in large chunks. Will have to wait for awhile before I will go out, and figured I'd get the snowmobile stuck if I tried to ride out from the house to the cabin, trying to get it back in there too......so will wait til we
get some considerable melting. All time record setting month for snowfall in February!

Terry Beauchamp
Member
# Posted: 3 Mar 2019 09:42
Reply 


I know what you mean. I have a trail cam where we will be putting our cabin. I can’t get back there anymore to swap the SD card. The last time we went up about three weeks ago it was waist deep.

Terry Beauchamp
Member
# Posted: 10 Mar 2019 20:33
Reply 


Keith,

Do you have a way that I can contact you? (email, text) I met with Ivan and have a couple questions.

Terry Beauchamp
Member
# Posted: 11 Mar 2019 19:31
Reply 


My email is ttbeauchamp@charter.net

Terry Beauchamp
Member
# Posted: 27 May 2019 20:47
Reply 


Hi Keith
Somehow I must have mistakenly deleted Your email address. Could you send it to me again? I have a few questions about the permits you had to get. I am at that stage now and anxiously awaiting delivery to our property.

Great Outdoors
Member
# Posted: 28 May 2019 23:30
Reply 


Looks great! You may want to consider adding some type of vents or screens in the plywood skirting if you haven't already done so to cut down on moisture building up underneath.

KeithC
Member
# Posted: 31 May 2019 07:18
Reply 


Thanks! Yes, I have some small vents in the back of the cabin to help get some air through the crawl space underneath.

big10hammer
Member
# Posted: 7 Jan 2020 13:38
Reply 


Thank you for your post. I'm about to order up a plan with Ivan. A lady I worked with turned me onto him. Great guy and great craftsmanship.

I'm from over east of Cadott. I see you're about 30 miles from Ivan? I'll be doing all of the site work myself. Looking to have Ivan set up the transport. Do you know approximately the cost of the transport was or will be? It's about 55 miles.

Last question: Did you consider blown foam insulation on the underside of cabin to keep critters out? Have you had problems with critters?

Thanks!

KeithC
Member
# Posted: 8 Jan 2020 19:30
Reply 


big10hammer

I had my site prepped and the cabin delivered by a guy who does most of Ivan's projects. The total was around $3300 for some skid steer work and delivery.

Have not had any issues with critters. I nailed up some 1" thick foil backed foam sheet insulation underneath the cabin, and so far so good.

Good Luck!

big10hammer
Member
# Posted: 9 Jan 2020 10:30
Reply 


Thanks for the info! I'm hoping mine will be as nice as yours...

tjated
Member
# Posted: 9 Dec 2021 20:11
Reply 


Hopefully this string is still alive somehow. I am looking into Ivan Schrock and his cabins. Would you be able to to email about a brochure Ivan has, or other info regarding his cabins?

Nmzyggy
Member
# Posted: 30 Sep 2022 17:48
Reply 


Hi Keith, would I be able to contact you? We are having issues with foundation and anchor meeting udc code in neighboring Clark County. Had a couple questions. My email is nmzyggy@gmail.com.
Thanks,
Nancy

gmdomke
Member
# Posted: 21 Dec 2022 09:12
Reply 


Hi All,

This is a great thread! We are on Ivan’s “board” to have a cabin built in 2023. We are awaiting plans and will be meeting with Ivan again in the weeks ahead. I would be interested to learn how the Schrock-built cabins are holding up after a few years and if there are things you would do differently. We plan to put a walkout basement under our cabin with a full screen porch on the front. Any help here is greatly appreciated!

<< . 1 . 2 . 3 . >>
Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.