Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Cabin Construction / Gutters
Author Message
paulz
Member
# Posted: 6 Feb 2020 16:55
Reply 


Cleaning up my mess I found these used unrotted metal gutters I have been hanging onto. I haven't put gutters on my cabin yet, probably should. But in my efforts to get through this dang pile of 20' 4" PVC pipe I have I figured maybe I could cut it in half lengthwise, or maybe something less than half, and use that as gutter. Be simple to glue it, belled at one end, and screw it to the fascia board.

Any reason that wouldn't work?
0206200822_HDR.jpg
0206200822_HDR.jpg
0818191526_HDR.jpg
0818191526_HDR.jpg


Nobadays
Member
# Posted: 6 Feb 2020 17:50
Reply 


If you used the 4" PVC it would be easy to then feed this into a rain water collection system via easily obtained fittings. The old metal gutters look pretty well used....

paulz
Member
# Posted: 6 Feb 2020 18:00
Reply 


Ha, yeah they looked a lot better before walking over them for the last 5 years. Just want to be sure before I pitch 'em.

Good point on the water collection, a tee or elbow and down. Thanks!

paulz
Member
# Posted: 7 Feb 2020 11:15 - Edited by: paulz
Reply 


This guy made PVC pipe gutters like I'm thinking. I didn't think of slicing them on a table saw though, was thinking skill saw.

https://www.grandmashousediy.com/rain-gutters-pipe/

Funny comments, it's like the guy invented electricity. I guess on the grandmas house site they're easily impressed

NorthRick
Member
# Posted: 7 Feb 2020 16:27
Reply 


Ha!
Quoting: paulz
Funny comments, it's like the guy invented electricity. I guess on the grandmas house site they're easily impressed


Ha! She should have repainted that trim board before nailing those up.

You can buy spray paint that is designed to adhere to plastic if you don't like white. Sherwin Williams also sells brush on paint for plastic. I've used both with decent success. It sticks better to older plastic, which shouldn't be a problem with what you have.

Ziper
Member
# Posted: 25 Jan 2021 14:22
Reply 


When choosing a not entirely high-quality drainage system, there is a risk of deformation of the material under the influence of temperature, which can lead to leakage of gutters and pipes. It just happened to me. And I had to contact the workers, but they did not answer the phone. And on the Internet I found leaf filter reviews , where there was the phone number of the support service and they explained that all the workers are now at another facility and will immediately come to my call after it.

gcrank1
Member
# Posted: 25 Jan 2021 15:28
Reply 


That looks/sounds kinda spammy to me; better than most in the come on, though.
Pls tell me it isnt so, Ziper

gcrank1
Member
# Posted: 25 Jan 2021 15:34 - Edited by: gcrank1
Reply 


Paul, if you do the rain barrel thing make the input a diy '1st flush system', all pvc and very effective. For my pre-barrel filter I used successfully last year a hunk of Koi pond filter. At the 1st of each month I poured in 1.5 tablespoons of household bleach and stirred it well.
That 35ish gal of roof rain water was clear and clean all season to the bottom. We could have probably used as is for drinking but smart folks would give it a boil. We have artesian spring water available for free en-route for our potable so the rain barrel was or utility water. One uses far more utility than potable anyway so we were set.

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.