Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / General Forum / What's this pipe?
Author Message
paulz
Member
# Posted: 20 Dec 2020 08:18
Reply 


Guy in my town is giving away all this pipe. Any idea what it is and is used for? I think it's 3". Too thick for regular ABS looks like.
Screenshot_2020122.png
Screenshot_2020122.png
Screenshot_2020122.png
Screenshot_2020122.png


FishHog
Member
# Posted: 20 Dec 2020 08:33
Reply 


Looks like a heavier sch ABS than your typical plumbing pipe.

Boy you sure find some good stuff.

Nobadays
Member
# Posted: 20 Dec 2020 09:52 - Edited by: Nobadays
Reply 


If it is somewhat flexible it might be a polyethylene.... usually heat welded together. I don't know if there are fittings for it. Usually used for long distance above ground runs. Temporary piping...

paulz
Member
# Posted: 20 Dec 2020 10:04
Reply 


The ad says 'poly pipe' (bottom of photo) and it does look somewhat flexible. Yeah regular ABS couplings won't fit..

It was on CL about a month ago for a buck a stick, I emailed him for diameter, he said 3 inch maybe but would measure. Never got back to me. Now it's free.

I need 100' of 3" ABS for my drain but not going to weld this stuff to save a few bucks.

Thanks

FishHog
Member
# Posted: 20 Dec 2020 11:23
Reply 


if its just for a drain, I bet you could find something very close to the ID of that pipe and use it with a few hose clamps to connect. Might need to warm the end to compress it down. Again if its just a drain, a bit of a leak probably won't matter so you might not even need to clamp it

Nobadays
Member
# Posted: 20 Dec 2020 11:44
Reply 


^^this.... free, drain pipe ?

Popeye
Member
# Posted: 20 Dec 2020 12:00
Reply 


For the price, and the application, a concrete collar at joints would suffice.

Irrigation Guy
Member
# Posted: 20 Dec 2020 15:36
Reply 


Looks like HDPE pipe which needs to be fused. If you want to use for drainage you probably could outside. If it is IPS pipe schedule 40 fittings will fit but you would need some type of epoxy to glue it, PCs glue won’t work. If it is CTS size you would need to fuse it or use brass compression fittings which would be cost prohibitive

Irrigation Guy
Member
# Posted: 20 Dec 2020 15:38
Reply 


You need to get the info off the side of the pipe to be sure

paulz
Member
# Posted: 20 Dec 2020 16:55
Reply 


I'm scheduled for Tuesday..

gcrank1
Member
# Posted: 20 Dec 2020 22:14
Reply 


If it is just for drain pipe there are all kinds of makeshift cheap ways to join it, after all, pioneers made waterways with half round log troughs and think about how bamboo has been used for millennia.

mj1angier
Member
# Posted: 21 Dec 2020 17:28
Reply 


Yeah for drain, I would think this would work:
https://www.ebay.com/itm/40-Pk-Flexible-Fernco-Rubber-Boot-3-PVC-Plastic-Pipe-Connect or-Coupling-Coupler-/231547144569

paulz
Member
# Posted: 22 Dec 2020 08:33
Reply 


Yep, or old radiator hose. Going over there later today.

This guy welds poly pipe with an iron, results look good. Could probably do it in the field.

https://www.youtube.com/watch?v=PlcfgEoO1Fw&ab_channel=Koblenzjunge

paulz
Member
# Posted: 22 Dec 2020 17:14
Reply 


Quoting: Irrigation Guy

Looks like HDPE pipe which needs to be fused. If you want to use for drainage you probably could outside. If it is IPS pipe schedule 40 fittings will fit but you would need some type of epoxy to glue it, PCs glue won’t work.


Just got back, he's right down the road*. Really hard to read the writing on the pipe, 4" IPS DR11 Driscolex something. I was going to put it on my rack but they are 30' sticks! About 25. Going back with a trailer tomorrow. He's getting rid of a bunch of pipe and junk, I took a few things in my truck.

* So way back about 8-10 years ago, before I built the cabin, I was driving to the property and noticed some piles of road base, which I was needing, in front of a property a few driveways down. I stopped and met the contractor, told him what I was up to. He said there was an old dozer on the property, a 50 acre spread with very nice house, barns.., the owner was an old guy who was not well, and I was welcome to the dozer. I grabbed it, got it going with a bit of work and have been using it ever since.

The owner died and left the property to his accountant, much to the dismay of his family. That's about all I knew until today, when I met the kid, the son of the accountant, who is trying to clean the place up. The pipe is sitting not 20' from where I picked up the dozer years ago! Small world.
20201222_132729.jpg
20201222_132729.jpg
20201222_1327441.j.jpg
20201222_1327441.j.jpg
20201222_133259_resi.jpg
20201222_133259_resi.jpg
20201108_1142201.j.jpg
20201108_1142201.j.jpg


Irrigation Guy
Member
# Posted: 22 Dec 2020 17:23
Reply 


Nice! IPS will be easier to find fittings to make work without fusing.

Nobadays
Member
# Posted: 22 Dec 2020 18:13
Reply 


Dang man! You were born under the good end of the rainbow!! I'm at the other end..., ain't a da#n thing here! Clean it up for them... heck no telling what other treasures are hiding in the grass!

mj1angier
Member
# Posted: 23 Dec 2020 10:06
Reply 


Heck, I would do it for the double wall pipe alone!

paulz
Member
# Posted: 23 Dec 2020 10:23
Reply 


Well I'm sitting here this morning trying to figure out how to haul 30' lengths. My trailer is only 18'. I could stick build an extension. Or build a rack on the Dodge dually with some 20' sticks and have the pipe hang over.

Got a couple hours to figure it out.

drb777
Member
# Posted: 23 Dec 2020 11:53
Reply 


https://www.hartenergy.com/news/history-pe-pipe-52531
Read about Drisco pipe history above link.
I've used thousands of feet of such HD poly pipe for o&g flowlines for the past 40 years, great stuff. The original orange pipe wasn't resistant to UV light & would become hard and decompose over time when left exposed. But when Phillips Petrol. & Depont developed this product it revolutionized the "fast-pipe" industry.
Interesting side note; 100 years ago my grandfather cast concrete pipe in San Bernardino CA for crop irrigation purposes. Seems horribly inefficient compared to HDPE of the past 50 years.

paulz
Member
# Posted: 23 Dec 2020 16:22
Reply 


You bet I'm gonna read about it, now that I officially have some..

Phew, that was the craziest thing I have towed in here. These suckers are 40'! And about as stiff as a wet noodle, which is actually perfect for my project. I extended my trailer this morning planning on 30 footer. Took some doing but got the first half of them here. Going back later for the rest, should go easier. Like I said, they are literally 1/2 mile away, I went about 25 mph. Zero tongue weight.

Wonder how much these these are worth? If I'm saving a hundred bucks I'll kick my own ass. Well, gotta unload and go back.
20201223_125002_resi.jpg
20201223_125002_resi.jpg


FishHog
Member
# Posted: 23 Dec 2020 16:27
Reply 


well I'm glad you made it back safe. that is quite the transport method.

paulz
Member
# Posted: 24 Dec 2020 07:49
Reply 


Second round went quicker. Little over 800'. I only need 200 for my drain, 5 pipes, so I think I'll just use the rubber clamp couplers.

Thanks for giving me the impetus to go get this stuff.
20201223_154419_resi.jpg
20201223_154419_resi.jpg


Irrigation Guy
Member
# Posted: 24 Dec 2020 08:28 - Edited by: Irrigation Guy
Reply 


I would say to buy that new would be several thousand dollars.

paulz
Member
# Posted: 24 Dec 2020 09:20
Reply 


Yeah I'm seeing around $4 a foot. Took me most of the day yesterday and I'm beat today but worth it. Plus that culvert pipe.

Another potential benefit. the young strapping kid who lives there is anxious to come down and work for me, close enough to ride his bicycle over.

paulz
Member
# Posted: 20 Jan 2022 15:25 - Edited by: paulz
Reply 


Finally getting around to using some of this stuff. Have to haul it up to the cabin from the yard, 40' sticks. Damn stuff is heavy 1/4" wall, too long and heavy to hand lug. So this is my makeshift rack. The front are ski racks, the back is a hitch mounted bike rack turned upwards. Got them both at a rummage sale for five bucks. I didn't want a lumber rack on this truck, cabin is done, shop is done, still going to do a tractor port but the materials are already here.

Dammit, picture flipped..
20220120_110110.jpg
20220120_110110.jpg


BRADISH
Member
# Posted: 23 Jan 2022 23:58
Reply 


I love the ingenuity! Never pass up some good free stuff - those are the words I live by! I have access to a pretty amazing industrial dumpster at my work (3 actually). I've found anything from Knack boxes, a welding table, scrap steel (I once got a sheet (6'x9') of 1/8th steel plate outta there!), dimensional lumber, wire and more in there!

I know it was awhile ago - but that culvert you snagged was worth the trip alone! That stuff is gold around these parts.

paulz
Member
# Posted: 24 Jan 2022 09:18 - Edited by: paulz
Reply 


Thanks! I'm running 200' of it using the Fernco rubber couplers mj1angler mentioned above. Only needed 5, got a 4 pack on Ebay for $20. I was at HD yesterday buying the last one, price on 4" ABS/PVC pipe was crazy! This HDPE pipe is working great for me, being flexible in comparison, a 40 footer will bend into a U. I'm laying it above ground on my hillside, covered by tree duff, it follows the contours of the hill and stays flat on the ground.

I'll be using that culvert pipe too at some point!

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.