Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Cabin Construction / House wrap and rim board protection
Author Message
WILL1E
Moderator
# Posted: 29 Sep 2021 09:45
Reply 


Trying to decide what size house wrap to get for the build.

Given i have a post and beam style foundation and the joist assembly is elevated, should the house wrap go over my pressure treated rim boards?

I never had plans to cover the rim board with siding. I debated covering the rim board with aluminum coil stock before i put on the wall sheathing so that any water that ran off the sheathing and eventual siding wouldn't touch the treated rim board.

snobdds
Member
# Posted: 29 Sep 2021 10:18
Reply 


Get the largest size house wrap, then cut it down to what ever size you can manage by yourself. Use the cut offs on windows and doors.

Rim boards is part of the dried in structure and should be covered with house wrap and sided. You can wrap the house wrap under the rim board and staple to the back side.

Brettny
Member
# Posted: 29 Sep 2021 12:08
Reply 


Quoting: WILL1E

I never had plans to cover the rim board with siding

You should cover it with something. Something that dosnt rely on sealants to keep water out. Or skirt the rim board and underside.

WILL1E
Moderator
# Posted: 29 Sep 2021 12:24
Reply 


My sheathing extends past the subfloor and over the rim joist about 1".

Nate R
Member
# Posted: 29 Sep 2021 13:26
Reply 


So why not extend the siding down there? Are you using pre-cut lengths that then won't be long enough? Or?

snobdds
Member
# Posted: 29 Sep 2021 13:48
Reply 


I would just put sheathing on the rim board to keep the planes equal for house wrap and siding.

WILL1E
Moderator
# Posted: 29 Sep 2021 14:34
Reply 


I bought 10' sticks for the wall. They will be trimmed to 9'6". Add the bottom plate and the doubled top plate the studded wall is 9' 10.5". Subfloor is 3/4". The 1/2" plywood sheathing i ordered is 10' long. Therefor the sheathing will cover the wall, subfloor and 3/4" of the rim joist leaving ~8.5" of the pressure treated rim joist exposed.

My plan was to buy 14" tall aluminum coil and wrap the 2x10" rim board and the bottom couple inches of the studs before i put the sheathing on. So i was going to buy 10' long housewrap which would cover the sheathing and then the coil would cover the rim board. I was trying to leave the rim board exposed (no siding) in case i decide to add on additional decks.
Wall.JPG
Wall.JPG


Brettny
Member
# Posted: 29 Sep 2021 17:01
Reply 


That should work. If you want to make it a bit fancy bend an L on the bottom below the rim board. It helps keep the aluminum streight and wrinkle less when nailing it on.

snobdds
Member
# Posted: 29 Sep 2021 17:59
Reply 


Well that changes things, but on all other areas that doesn't get a deck, wrap it and side it.

toyota_mdt_tech
Member
# Posted: 29 Sep 2021 20:25
Reply 


Have you ordered the 10 foot siding yet? If not, order it in 11 feet, I bet cost wont be too much different than the 10 foot stuff.

WILL1E
Moderator
# Posted: 30 Sep 2021 07:46
Reply 


The siding hasn’t been ordered but the 10’ sheathing was special ordered and picked up last night.

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.