|
| Author |
Message |
spencerin
Member
|
# Posted: 29 Sep 2022 12:08
Reply
Can you rotate a bit like a clay spade/shovel in the chuck? So, instead of the shovel facing up, turn it 180*, or even 90*, so it's facing down or sideways, without changing the orientation of the rotary hammer drill itself, of course.....
|
|
ICC
Member
|
# Posted: 29 Sep 2022 13:47 - Edited by: ICC
Reply
SDS-Max shank
|
|
spencerin
Member
|
# Posted: 29 Sep 2022 14:08
Reply
I'm thinking that is a "no".....
|
|
ICC
Member
|
# Posted: 29 Sep 2022 20:52
Reply
Yes, a no.
|
|
Brettny
Member
|
# Posted: 30 Sep 2022 09:50
Reply
Arnt all SDS bits in a rotory chuck? Put the drill in drill mode until its clocked the right way then back into chizzle mode.
|
|
ICC
Member
|
# Posted: 30 Sep 2022 11:25 - Edited by: ICC
Reply
Apparently Milwaukee does have an adjustment mode where the position can be changed and then locked in. At least on the $700 model I saw last night did. Makes sense. I must have missed that or the off brand cheap copy I saw didn't have that.
|
|
snobdds
Member
|
# Posted: 30 Sep 2022 12:15
Reply
Just put the selector to hammer drill. Get position. Put the selector to hammer.
|
|
spencerin
Member
|
# Posted: 1 Oct 2022 21:41
Reply
Just what I wanted to hear.
|
|
|
|
