Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Member's Projects and Photos / New guy,new camp build!
. 1 . 2 . >>
Author Message
Aaron29
Member
# Posted: 13 Apr 2013 20:22 - Edited by: Aaron29
Reply 


Hello folks.
My name is Aaron29 and I hail from Nova Scotia.I am a AVID fisherman/hunter.I recently purchased a huge chunk of land that includes a beautiful trout lake.I am currently building a 16'x16' cabin about 200' away from the lake.Just did the foundation and floor joists yesterday.
I have lurked here for quite a long time as I wanted to wait to post until I actually had something to post....

Im sure I will have alot of questions.First one..Trying to save money I bought untreated 2x10 and 2x6 spruce boards.Anyone have any inexpensive/homemade concoctions to weather treat the wood?

Anyways thanks for having me and I look forward to sharing this build with you all.
First day progress
First day progress


shooter mcgavin
Member
# Posted: 13 Apr 2013 20:46
Reply 


Welcome and nice progress!

toyota_mdt_tech
Member
# Posted: 13 Apr 2013 21:14
Reply 


I'd double up on your rim joist, all the way around and run a large beam under the middle to support the middle of the floor joist with blocking all along the way. Add more blocks/supports around the perimeter too.

Looks good.

Aaron29
Member
# Posted: 13 Apr 2013 21:25
Reply 


hello toyota!!Ya I am running a 4x4 under all of the joists.Also I am supporting the centers with deck blocks on patio slabs on gravel.The only access to the site is by 4 wheeler so getting supplies up there is a bit of a challenge.It took 4, 3km trips just to get what I got there.

The only thing you suggested that I havnt considered is doubleing up on the rim joists.

Thanks for the pointers and the welcome!

Aaron

Just
Member
# Posted: 13 Apr 2013 22:51
Reply 


If you used galvanized nails you could spray it with a mix of 1 lb copper sulfate and 2 gal. of water . use a weed sprayer .that much should do the whole subfloor ,after it dryes spray on a coat of lite used oil.should last a long time under the cabin. get copper sulfate at home hardwere they sell it for root control in pipes 10.00$ a lb ..the stuff eats iron so it will rust ungalvanized nails quickley. will cosume a paint brushes metal band if left overnight .not likely hurt the stringth of your nails if you only use it once , but they will show rust,

trollbridge
Member
# Posted: 13 Apr 2013 23:33
Reply 


Welcome Aaron!
Have fun and post lots of pictures

cabingal3
Member
# Posted: 14 Apr 2013 21:43
Reply 


welcome Aaron29 -we are glad to have u join us.cant wait to see the progress.we are getting ready to head up to our woods and do some work there.gives a person some purpose in life.starts the blood to going just thinking of land.u sure did alot for the first day!

jrbarnard
Member
# Posted: 15 Apr 2013 07:30
Reply 


Hi Aaron, welcome to the forums. How much land and around about where?

What all ya hunt and fish for on your land?

You have both water and animals there?

Where I am, we have about 330-ish acres in SW Texas and we have no water to speak of, but tons of Axis, Aoudad, Whitetail, Turkeys, Hogs, Mouflon, Stags, and Sika. Fishing is about 50 miles away though.. heh

Russ

beachman
Member
# Posted: 15 Apr 2013 11:51
Reply 


You could try to get some good old fashion creosote. It will protect anything. It is pretty deadly stuff but if used carefully, it can be a great preservative. Stinks - but I happen to like the smell. Like an old railway bed. Not sure if you can still get this product.

Tobit
Member
# Posted: 15 Apr 2013 13:06
Reply 


Nova Scotia is beautiful country Aaron. I'll be watching your build as I plan to build a 16x16 cabin "someday" as well.

Alaskaman
Member
# Posted: 15 Apr 2013 19:35
Reply 


Quoting: toyota_mdt_tech
# Posted: 13 Apr 2013 21:14

I'd double up on your rim joist, all the way around and run a large beam under the middle to support the middle of the floor joist with blocking all along the way. Add more blocks/supports around the perimeter too.


I had the same thought, 16' is a large span for 10's.


Great fun can't wait to see the next pics.

Tobit
Member
# Posted: 15 Apr 2013 19:44
Reply 


For my 16' cube, I'm going to use 9 of those deck blocks with 3 2x12's in them as girders. I will then set chicken wire on top of them for critter protection and then lay down my 2x10 joists across them. Fill with insulation, cover with plywood.

Just
Member
# Posted: 15 Apr 2013 19:54
Reply 


You can no longer buy creosote in ontario without a pestiside Licence not sure about Nova Scotia.

toyota_mdt_tech
Member
# Posted: 15 Apr 2013 21:08
Reply 


For treating the lumber, look for "Jasco", comes in 1 and 5 gallons. Put it in a pump up cheap weed sprayer and spray away.

http://www.homedepot.com/p/GREEN-Copper-Green-1-Gallon-Wood-Preservative-Copper1/1002 03025#.UWykU0qGc9U

Aaron29
Member
# Posted: 17 Apr 2013 21:09
Reply 


Thanks for the reply's folks!
Spent the day up at the site,the entire platform is now complete.Unfortunately,my camera was forgotten at home.I will head up to the site tomorrow and update with pictures.

I ended up buying a gallon of "Penntox wood preserver" and painted the sucker green!

Next up will be lumping 140 2x4's up to the site.

toyota_mdt_tech
Member
# Posted: 17 Apr 2013 23:25
Reply 


Quoting: Aaron29
I ended up buying a gallon of "Penntox wood preserver" and painted the sucker green!



Aaron, that will keep the rot and varmints away for years. Good move/investment.

Aaron29
Member
# Posted: 18 Apr 2013 17:19
Reply 


Here she is.Cant wait till the 2x4's get up there.

Yesterday we installed the joist braces,installed the side/center supports,pentoxed the flooring and drank a 8pack of Bud on the floor!
it's n ice to see it started and full steam ahead!
046.JPG
046.JPG
047.JPG
047.JPG
051.JPG
051.JPG
053.JPG
053.JPG


Aaron29
Member
# Posted: 18 Apr 2013 17:47
Reply 


Quoting: jrbarnard
What all ya hunt and fish for on your land?

You have both water and animals there?


We have about 110 acres.A 15 acre lake somewhat splits the land in half.We hunt white tail,grouse,bear, and rabbits occasionally.

Aaron29

toyota_mdt_tech
Member
# Posted: 18 Apr 2013 20:39 - Edited by: toyota_mdt_tech
Reply 


Aaron, that rim joist is "bolted" to the 4X4 post. Which is fine to hold it in place, but I think the load should be put on the concrete pad directly instead of through the bolt. That rim joist will carry the entire load of the floor, walls and roof. Cut a chunk of 2X4 or 2X6 and cut it to fit between the rim joist and the concrete pad real tight. That way, the load is not on the bolts. Otherwise, you'd want the rim joist setting on top of the 4X4 instead of on the side. If you put in the pieces, paint them green too.

Aaron29
Member
# Posted: 18 Apr 2013 20:56 - Edited by: Aaron29
Reply 


Ahhh Gotchya!

Aaron29
Member
# Posted: 23 Apr 2013 18:14
Reply 


well I hauled 57 of the 100 2x4's up to the site thismoring and built and raised 2 walls....here is where she stands today!!Im excited!
camp_2.jpg
camp_2.jpg
camp.jpg
camp.jpg


Alaskaman
Member
# Posted: 24 Apr 2013 13:20
Reply 


Looking good

nscampgirl
Member
# Posted: 25 Apr 2013 16:37
Reply 


Whooo hoo! Another NS 16x16! Love it!

I'll enjoy watching your progress until I can get mine started! What county are you in?

Aaron29
Member
# Posted: 25 Apr 2013 16:50
Reply 


Quoting: nscampgirl
What county are you in?


I am in beautiful Guysborough county!

cbright
Member
# Posted: 26 Apr 2013 13:52
Reply 


Another Nova Scotian here....

Starting a 16'x13'=208ft2 (to keep it under the 215sqft permit size) build soon and will be making a thread showing my progress. I'm in Waverley, just outside of Dartmouth and have some tricky land to build on.... but it is waterfront!

Later, Chris

Aaron29
Member
# Posted: 27 Apr 2013 17:41
Reply 


Not much of a update but what the heck...im excited..

WALLS ARE UP!!
camp4.jpg
camp4.jpg
camp6.jpg
camp6.jpg


gunslinger22
Member
# Posted: 28 Apr 2013 12:01
Reply 


It might be that I just can't see it but make sure you've got your third stud in each corner for nailing whatever wallboard you are using.

Aaron29
Member
# Posted: 28 Apr 2013 12:30
Reply 


Ah yes Gunslinger,the third studs are there!!

Aaron29
Member
# Posted: 4 May 2013 20:08
Reply 


Here's where Im a little stumped,and could use some advise.

So I am ready to build the roof trusses.I am doing a 1/3 loft and dont want the cross member type truss.
I am going to use 2x6's with 2 2x6's for the main beam.
Since I want some headroom in the loft im not sure how to figure how long each 2x6 needs to be.The building is 16x16.

As you can tell by my use of the words "mainbeam and crossmember" that I dont really know about trusses,although I am pretty handy with a hammer.

Some LAMANS terms advise would be great...thanks.

Just
Member
# Posted: 4 May 2013 22:20
Reply 


google Pythagoream theorem ,that's the way you determine rafter length .

. 1 . 2 . >>
Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.