Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Cabin Construction / Best way to cut metal roofing
Author Message
Smawgunner
Member
# Posted: 12 Mar 2014 17:52
Reply 


I'm building a wood shed with a metal roof and I'm not sure how to make a good straight cut. Tin snips would take forever and I think the result would be poor. Same with a hack saw I think. I thought of using my big dremel tool. Jig saw? I'm open to suggestions!

turkeyhunter
Member
# Posted: 12 Mar 2014 18:11 - Edited by: turkeyhunter
Reply 


turn a regular carbide tip skill saw blade ( a old one) backwards and install back on skill saw and it cuts GREAT...

bldginsp
Member
# Posted: 12 Mar 2014 18:29 - Edited by: bldginsp
Reply 


I invested in an electric tin shears, like the one shown on the link below. It's a bit tricky to use on corrugated or ribbed roofing, but much easier than hand tin snips, I've been real happy with it. The one shown in that link is Chicago Electric brand which I don't recommend, it's the first link I could find just to show you what they look like.


http://t.harborfreight.com/14-gauge-swivel-head-shear-68199.html#.UyDelcu9KSM

You can also put a metal cutting abrasive wheel into a skil saw, but it makes a hell of a racket, lots of sparks and leaves a raspy edge. The electric shears is better for little cuts, a wheel only cuts straight.

MJW
Member
# Posted: 12 Mar 2014 19:49
Reply 


Quoting: turkeyhunter
turn a regular carbide tip skill saw blade ( a old one) backwards and install back on skill saw and it cuts GREAT...


What he said...

Martian
Member
# Posted: 12 Mar 2014 20:11
Reply 


I don't bother turning the blade backwards, but I do cut the metal from the backside. WEAR GOGGLES!!!

MtnDon
Member
# Posted: 12 Mar 2014 20:22
Reply 


Very fine tooth metal cutting jigsaw blades, like these from Bosch.

Cut from the backside. Not as noisy as circular saw blades but still noisy enough to use hearing protection. I clamp a straight edge as a guide and get nice straight cuts.



There are also some that do nice curved cuts.

Malamute
Member
# Posted: 12 Mar 2014 21:30 - Edited by: Malamute
Reply 


I've used the circular saws with the blade turned backwards. Cut from the back. I dont like them, as noted, they make a terrific racket, tons of sparks and metal particles all over.

Tin snips aren't too good for long cuts. I have some shears that look like very large scissors. They are alloy handles with steel cutting jaws. Its good to have someone to help roll the metal away from the shears so you can continue to cut straight.

The electric shears are great, but not cheap. If you don't work with metal much, I'd find it hard to rationalize buying some.

Wear gloves when handling metal. You can get really wicked cuts in a heartbeat.

Smawgunner
Member
# Posted: 12 Mar 2014 22:21
Reply 


Great tips...thanks guys!

bldginsp
Member
# Posted: 13 Mar 2014 08:07
Reply 


The electric shears are not cheap. I found an off brand, 'factory reconditioned' for about $80. If you're doing more than one shed, or you know you will make a lot of odd cuts, it's the best way to go.

Bret
Member
# Posted: 13 Mar 2014 08:57
Reply 


http://www.amazon.com/Malco-Capacity-Cutting-Attachment-8-Inch/dp/B0000AQK7C/ref=sr_1 _1/182-3622565-2678810?ie=UTF8&qid=1394715300&sr=8-1&keywords=shears+for+electric+dri ll

Check these out
Bret

OwenChristensen
Member
# Posted: 14 Mar 2014 07:46
Reply 


I do several roofs a year, so the electric nibblers for long cuts are cheap for me. For cross cuts, I special order the length. If I have to cut them, I just use an old carbide blade in the skill saw, also Menards has a cross cut shear for rent.

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.