Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Cabin Construction / Rough Cutt Hemlock over Unfinished drywall
Author Message
hct4all
Member
# Posted: 3 Aug 2014 22:36
Reply 


Good evening. I currently have unfinished drywall at camp and was going to finish it but... I was at a neighbors and he has rough cut hemlock and it is NICE. I plan on putting plastic over the drywall and nailing right to the studs on the walls. I will put plastic and furring strips on the ceiling. Any possible issues? I will use black plastic so any small gaps will not be seen. No current moisture issues. I leave a window cracked 1" and ceiling fan on low.

Thanks!

bldginsp
Member
# Posted: 3 Aug 2014 23:22
Reply 


The only issues could possibly be with moisture if your walls are uninsulated, the weather where you are gets very cold, and you put a lot of warm moist air into the cabin, in which case the dew point would be reached at the plastic under the hemlock, causing condensation on the plastic, conceivably causing mold under the wood. But if the walls are insulated the plastic won't see the dew point

Aside from that remote possibility, in general it's just not a good idea to wrap the whole place in plastic, so the building can breath. But if you leave the window always cracked you are probably getting enough air exchange. But eventually someone will close it all up and then wonder why it seems stale.

You could use 15 lb black paper rather than plastic, which is more permeable

hct4all
Member
# Posted: 4 Aug 2014 11:02
Reply 


The walls are insulated. The camp is in northern PA so it can get pretty cold. There are 2 doors and 2 windows in the room so I wish it was a little tighter. I thought that the plastic would stop any possible mold from growing. Thanks for your input.

bldginsp
Member
# Posted: 4 Aug 2014 13:59
Reply 


tightening up the doors and windows will go a long way. One thing that often gets overlooked is the space between the framing and the door or window jamb, or frame. It gets covered with trim but still, if there is no insulation in there, air and cold can freely pass.

good luck

CaptCanuck
Member
# Posted: 6 Aug 2014 09:54
Reply 


Is your roof vented?

hct4all
Member
# Posted: 16 Oct 2014 19:40 - Edited by: hct4all
Reply 


I took the plunge. Done for hunting season. I have 1 wall 1 small part of the ceiling and trim left. I was much more time consuming than I would have thought.

Before Pics
IMG_0372.JPG
IMG_0372.JPG
IMG_0370.JPG
IMG_0370.JPG


hct4all
Member
# Posted: 16 Oct 2014 19:46
Reply 


After Pics:
After Pics 1
After Pics 1
After Pics 2
After Pics 2
After Pics 3
After Pics 3
After Pics 4
After Pics 4


hct4all
Member
# Posted: 16 Oct 2014 19:54
Reply 


$400 in hemlock.
60 hours in labor (3 weekends 2 people)
$80 in poly.
Tons of fun.

Except for planning the lumber. That was not much fun.

If I had to do it again I would order 1/2" thick and pay to have it planned.

bldginsp
Member
# Posted: 16 Oct 2014 19:55
Reply 


A LOT nicer than sheetrock

old243
Member
# Posted: 16 Oct 2014 22:28
Reply 


Good job. As time goes on the wood will darken and really look good. Also good luck with your hunting . You have a nice place to relax in in the evenings and tell tall tales. old243

turkeyhunter
Member
# Posted: 17 Oct 2014 07:32
Reply 


now it looks like a HUNTING CAMP!!!! great job!!!

I have a buddy that did red cedar in his camp and he put tar paper behind it so you would not see insulation.

hct4all
Member
# Posted: 17 Oct 2014 21:41
Reply 


Thanks for the feedback! It was well worth it

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.