Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / Cabin Construction / The Haul, Old Log Tobacco Barn
Author Message
Hoosierboy
Member
# Posted: 1 Jan 2017 10:19
Reply 


I found a guy, who was selling a pile of antique lumber. I noticed that underneath the lumber pile, was a bunch of logs as well. That was what I was really after, but didn't know the condition of them until I drove over two hours to get them.

I didn't know how I was going to haul it all, and I didn't know the actual length of the material. I rolled the dice and got Uhaul's biggest moving truck.

I hired one extra guy to help pull and load all the logs and boards. It was one hell of a job loading all this by hand! The amount of dirt and dust was unreal.

There was a couple logs, that couldn't be saved as they were contacting the dirt floor of the barn area. I still have to inventory everything, but the plan is to build a 12' x 18' cabin on a skid foundation.

I am hoping to start the build just after winter, if I can get other projects done first. That is my son on the left, me in the middle, and Bob on the right.
00M0M_i4qFa2drI7e_12.jpg
00M0M_i4qFa2drI7e_12.jpg
IMG_6877.JPG
IMG_6877.JPG
IMG_6878.JPG
IMG_6878.JPG
IMG_6886.JPG
IMG_6886.JPG


Hoosierboy
Member
# Posted: 1 Jan 2017 10:25
Reply 


Over the years I have driven many fully loaded 26' foot moving trucks. This load proved to be the heaviest for sure. My son had to go back to college, so I had to unload it by myself and the wife.

I stacked everything on pressure treated 4 x 4's, and drove in fence posts to hold the pile. I rigged up a pulley system so I could use my lawn mower to pull the logs out the back.
IMG_6902.JPG
IMG_6902.JPG
IMG_6908.JPG
IMG_6908.JPG
IMG_6911.JPG
IMG_6911.JPG
IMG_6912.JPG
IMG_6912.JPG


Salty Craig
Member
# Posted: 1 Jan 2017 11:19
Reply 


Hoosierboy

You got yer work cut out buddy. I can see already that you're not scared of it. I'm a Hoosier boy myself. Born in Elkhart. I don't tell that to many people.

Salty

Hoosierboy
Member
# Posted: 1 Jan 2017 11:41
Reply 


I am originally from Shirley Indiana.

The way I see it, I have logs already harvested, debarked, seasoned. So I am already ahead of the game.

After I get the foundation built, I will clean and inventory all the logs to see exactly what I have. I should have done that when I unloaded, but time on the truck was expiring

An added plus, the antique dimensional lumber is worth more than I paid for the entire load.

bldginsp
Member
# Posted: 1 Jan 2017 23:00
Reply 


Now dat be a BIG pile o' wood!

The tobacco barn logs appear to have been used as poles, not horizontal logs in log cabin walls. I don't know much about tobacco barns but the few I've seen pics of were very open and simple pole barn type things- a roof to shed water and open walls to facilitate drying. Point is- wondering how you will use these rather irregular poles in a cabin? I'm sure you've got ideas- keep us posted.

Do they still smell of tabacky?

Hoosierboy
Member
# Posted: 1 Jan 2017 23:22
Reply 


If you look close at the picture you will see saddle notches near the ends of the logs, and some rafter logs.

They were not poles, as nearly all of the logs have saddle notches on nearly all the ends. Many old tobacco barns here in the south, were constructed with unchinked logs just like these.

These logs are in such good shape, I think they ended up building a larger building over the top of it. This pic below is very similar to what it may have looked like
ChestnutLogBarnCi.jpg
ChestnutLogBarnCi.jpg


Ontario lakeside
Member
# Posted: 2 Jan 2017 00:01
Reply 


Cool story. I will be interested to see what you make of them!

bldginsp
Member
# Posted: 2 Jan 2017 15:44
Reply 


I stand corrected. I hope you can effectively use them to construct a building that is not quite so airy as a tobacco barn.

Hoosierboy
Member
# Posted: 2 Jan 2017 16:08
Reply 


I will do my own saddle notching on the logs, but will not do a full scribe on them. I will use daubing/chincking between the logs. Not a big deal, just have to take my time with it.

Hoosierboy
Member
# Posted: 10 Jun 2018 10:23
Reply 


So I ordered rough sawn, true 1" x 12" x 16' boards from a local saw mill. I will be using them for the floor boards. I found another lumber salvage yard that had the floor joists 2" x 10" x 12'. I will set them with hangers, and 12" on center. I will use 6" x 6" pressure treated for the skids.





Hoosierboy
Member
# Posted: 23 Apr 2019 17:37
Reply 


I have been busy building this cabin

[img= ][/img]

ICC
Member
# Posted: 23 Apr 2019 20:22 - Edited by: ICC
Reply 


You really need to downsize that last image as it is crazy wide. Either that or upload it like the earlier inages in the topic so the system can resize it. Very hard to read the whole topic on a small screen device.

qbodsyt
Member
# Posted: 23 Apr 2019 22:52
Reply 


Very cool build project, years in the making!

Hoosierboy
Member
# Posted: 23 Apr 2019 23:06
Reply 


I don't know why it did that sorry

Hoosierboy
Member
# Posted: 18 Dec 2019 21:39
Reply 


Well, it's been moving along and almost done with log walls. I am documenting all this with pics and video as well.
IMG_5541.JPG
IMG_5541.JPG
IMG_5589.JPG
IMG_5589.JPG
IMG_5592.JPG
IMG_5592.JPG


Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.