Small Cabin

Small Cabin Forum
 - Forums - Register/Sign Up - Reply - Search - Statistics -

Small Cabin Forum / General Forum / Making deck stairs/ramp slip resistant?
Author Message
Jcotrel1
Member
# Posted: 29 Aug 2020 15:50
Reply 


I'm adding on to my deck and re-doing my current deck. I will have 2 sets of stairs and a ramp I'm looking to make slip resistant. I've tried the traction strips that stick to the wood but it doesn't last.

Wondering if adding sand to wood stain would work as it does with paint?

Thanks,
Jim

KelVarnsen
Member
# Posted: 29 Aug 2020 16:20
Reply 


I’ve got a couple of steps with asphalt shingles nailed to them. Doesn’t look the greatest but works just as well as the strips that you buy and are cheaper.

Atlincabin
Member
# Posted: 29 Aug 2020 19:17
Reply 


I doubt it would work with stain, since the stain is penetrative rather than a coating. Another possible alternative is using skateboard tape. May be a similar problem to your traction strips (i.e., may not stick well) but the stuff itself is pretty wear-resistant. I've used it on metal surfaces and it is good for many years there.

Absolutely
Member
# Posted: 29 Aug 2020 22:32 - Edited by: Absolutely
Reply 


I use Lee Valley high friction tape on all of my ramps and stair treads. I scuff the wood lightly before applying and have even stained over them. You could always tack the ends down with a staple gun or roofing nails. Marine carpet glue could help too.
20170511_125810_1598.jpg
20170511_125810_1598.jpg


toyota_mdt_tech
Member
# Posted: 29 Aug 2020 23:25
Reply 


Quoting: Jcotrel1
I'm adding on to my deck and re-doing my current deck...


They make a deck coating that you can add sand into, it dries with a no skid finish.

Your reply
Bold Style  Italic Style  Underlined Style  Thumbnail Image Link  Large Image Link  URL Link           :) ;) :-( :confused: More smilies...

» Username  » Password 
Only registered users can post here. Please enter your login/password details before posting a message, or register here first.