|
| Author |
Message |
paulz
Member
|
# Posted: 18 Dec 2017 11:56
Reply
I made some jumpers to connect my meter to various stuff, in series and set the switch to 10 amp. I got the readings in the photos. I just have to multiply the volts times amps to get the wattage, right? Quite a spread on the LED lights, but the higher ones are brighter.
|
|
dsmith14469
Member
|
# Posted: 18 Dec 2017 13:07
Reply
Yes, multiply Volts x Amps to get Watts. The other question is how are you converting the 12V to the 5V, that could be a drain also that needs to be considered.
|
|
ICC
Member
|
# Posted: 18 Dec 2017 13:08
Reply
Simple answer, yes, volts x amps = watts
|
|
paulz
Member
|
# Posted: 19 Dec 2017 12:02
Reply
Thanks guys. The 5v stuff is through an Anker 5 socket USB to 12v adapter. I put my meter before that and get a total reading, good idea.
|
|
|
