|
| Author |
Message |
neb
Member
|
# Posted: 24 Feb 2013 09:36
Reply
I want a very light gauge metal for roof and siding. What guage and price would I be looking for. I googled this but still lost! This is to cover some old biulding and don't want to invest to much into this project.
|
|
Just
Member
|
# Posted: 24 Feb 2013 10:29
Reply
A good canadain price would be 1.50 $ a sq. ft . new ,,,, used ????
|
|
VTweekender
Member
|
# Posted: 24 Feb 2013 10:29 - Edited by: VTweekender
Reply
I think 29 gauge is what is generally out there off the shelf metal roofing.....its usually about $3 per running foot for the colored roofing, about 2.50 ft for just galvanized , 38" wide as standard....give or take a few cents...I would guess siding would run about the same..
|
|
MJW
Member
|
# Posted: 24 Feb 2013 14:20
Reply
We just paid $2.21 a running foot for 36 inch colored at Lowe's. The special order stuff is alot cheaper than the in stock stuff and you can order it to length for your project.
|
|
neb
Member
|
# Posted: 24 Feb 2013 15:19
Reply
MJW
Is that 29 gauge?
|
|
bldginsp
|
# Posted: 24 Feb 2013 15:32
Reply
I've always paid less than $1 a running foot for used on Craigs list. I've gotten some good stuff and some not so good stuff. Just takes time for a decent deal to come around, but they do.
|
|
MJW
Member
|
# Posted: 24 Feb 2013 17:03
Reply
Quoting: neb MJW Is that 29 gauge?
Yes, it is.
|
|
Trapper
Member
|
# Posted: 1 Mar 2013 20:16
Reply
I have been pricing as well lately. Lowes price today was 3.21/ft
Home Hardware was 3.54 and Home Depot was over 4.00
Best price was 3.10 from a local Mennonite place. Much better price on screws and strapping.
|
|
|
|
