|
| Author |
Message |
MikefromMichigan
Member
|
# Posted: 19 Jan 2024 10:39
Reply
I thinking about getting a new wood stove for my hunting cabin. I live their most of the fall and visit occasionally off season. Its about 400 square feet and well insulated. I currently have a box-wood, cast iron wood stove in it that's about 25 years old and still in decent shape. It heats the cabin well: In fact to well. I have to keep the fire low enough to not roast the place. I usually only have to put wood in two to three times a day. I rarely put wood in it overnight unless its really cold. It lights real easy in the morning. It does put out a lot of smoke and has no secondary burn chamber, so pretty inefficient. I only burn about 2 face cords of wood per year though, and have 200 acres of woods, so the amount of wood I have to deal with is not bad. My questions are:
Would it be worth it to get a new EPA compliant woodstove and if so, would I be able to burn it low enough to not roast me out of the cabin without issues?
|
|
gcrank1
Member
|
# Posted: 19 Jan 2024 11:30
Reply
Imo, no. You already have what many of us wish we had. 
|
|
Steve_S
Member
|
# Posted: 19 Jan 2024 12:25
Reply
As grank said, you are up & running and works well. The biggest problem for everyone with a small cabin <750 square feet is getting a "right-sized" wood stove... It's TOUGH ! Not many small ones out there and they come with their own quirks & foibles + because they are not that common, they command a premium $ too.
An Example of Very Good small scale wood stoves is linked below... They are well worth the cost and if a new build without anything already in place worthy of consideration. Unless you wanna upgrade for "some" reason...
https://cubicminiwoodstoves.com/collections/all
|
|
Brettny
Member
|
# Posted: 19 Jan 2024 18:21
Reply
Cubic mini would be to small for a 16x25 building to me.
I have a uninsulated 10x14 shed with a upland wood stove I found in a thrift store for $150. If I build a fire then close things off it will put its self out and make charcoal. I suspect its from about 1970s.
In our 20x32 cabin I have a 1990s vintage vermont castings resolute. Havent burned it low and dont have any floor insulation yet. This has a thermostatic damper though so as the stove gets hotter the air intake close. No power needed.
In our full time home wood is primary heat (we used less than 1gal of any other type of fuel in 1.5yrs.) I have a vermont castings defiant with a cat, ash pan and thermostatic damper.
If your getting roasted out your stove has to much air getting into it. The fix may not be getting a newer stove but may be sealing up the one you have or getting a tighter stove
|
|
spencerin
Member
|
# Posted: 19 Jan 2024 22:38
Reply
No. Keep what you have.
|
|
Grizzlyman
Member
|
# Posted: 21 Jan 2024 19:07
Reply
If you have a stove that keeps you warm that you have to feed only 2-3 times per day and doesn’t require any overnight feeding, I’d keep that baby forever!!
|
|
paulz
Member
|
# Posted: 8 Feb 2024 10:17
Reply
Quoting: Brettny build a fire then close things off it will put its self out and make charcoal. .
I took note when you mentioned charcoal. I’m noticing too, and again yesterday, that when I put my night log in and close the door, sometimes there’s nothing left in the morning, sometimes a smoldering chunk that refuses to burn, despite putting new burn around it. Unsure why it happens occasionally, sometimes not.
|
|
gcrank1
Member
|
# Posted: 8 Feb 2024 11:23
Reply
Needs a smidge more air?
You are right on the edge of perfect, imo.
|
|
|
Brettny
Member
|
# Posted: 9 Feb 2024 19:03
Reply
Paul are you burning softwood?
|
|
paulz
Member
|
# Posted: 9 Feb 2024 19:33
Reply
Quoting: Brettny Paul are you burning softwood?
i do most of the time but before bed I load a big piece of hardwood, usually about 12-16" long and 6-8' diameter.
|
|
redwolfguild
Member
|
# Posted: 12 Feb 2024 19:07
Reply
I think I have been running my stove wrong this whole time. I don't use it a lot as my cabin is inaccessible in the winter with the vehicles I own. I have a aprox 400 sqft cabin with a Morso wood stove with a heat exchanger on the top. It heats up fast and then I turn the air down to have a flame on the wood. I always have to stoke it around 1-2 in the morning and then again at 6 when I get up. How low is too low. Are we just smoldering it all night to keep the stove warm? I might need to spend a few more nights in a row to test it out.
|
|
old greybeard
Member
|
# Posted: 12 Feb 2024 19:30
Reply
my cabin is 672Sqft. Had a old smoker stove 20 years. Threw heat, ate wood like crazy. About a gallon of creosote every year. Would hold a bunch of wood, overnite cold wx burns maybe 4-5 hours, always had to feed middle of the night, especially 10 degree nights.
Bought a 3.4cuft Osburn 2300 EPA stove 3 years ago. Best thing Ive bought for years. No smoke once up to temp, burning much less wood. Getting real 10hour overnight heat. Maybe a pint of creosote in a year. Doesn't run as hot, it does take a bit longer to heat from cold. Burns small fires excellent.
Plus I can now burn pine and hemlock, great fast, hot quick shoulder season fires.
Had one chimney fire, no longer a issue.
I'll never buy a smoker again. You must however make sure your wood is dry, I store 2-3 years ahead so no issue.
|
|
|
